Davco Weight Scales

 

MassLoad Portable Weigh In Motion

Using the highly successful Ultraslim Wheel Load Scales, Massload is able to offer a reliable and portable method to acquire and store vehicle weight. Operation of the system is simple and a single person can setup and operate the scale system with ease. Simply lay the weigh pads down, lay down the leveling track, connect the weight pads to the computer and you're up and running.

   

 

Overview:

  • Low profile, portable, dynamic weighing process

  • Obtain truck weight and vehicle weight quickly

  • Reliable scale system limited maintenance

  • Truck weight accurate to 3% GVW, 95% CI

  • Slow speed applications only (less than 16 km/hr)

  • Exceed ASTM IV guidelines for slow speed WIM

  • Windows 32 bits compatible Weight In Motion Software; automatic vehicle classification; overweight indication; not vista supported

Weigh In Motion Software:

  • Static and dynamic weighing mode

  • Automated vehicle classification with configurable classifications

  • Overweight indication based on vehicle classification

  • Traffic light support

  • Ground loop support

  • Report generation with configurable reports

  • Configurable main screen - show only relevant data

  • Post weighing screen allows you to fill in additional information

  • Program security on settings and user logins to protect weight data

Rated Capacity (pounds)

Dynamic weighing: 20K per pad (40K per axle weight)
Static weighing: 40K per pad (80K per axle weight)

Accuracy Dynamic: accurate to 3% of gross vehicle weight, 95% CI
Static: wheel load accurate to 0.5% full scale nominal
Overload Capacity 125% full scale safe overload
150% full scale ultimate overload
Temperature Range -10C to +60C (compensated based on an additional 0.05% to 0.10% FS static error for every 10C deviation from 20C)
Graduation 50lb standard
Weight 84 lbs / pad (2 pads per system) + tracking (73 lb each set)
Material High Strength Aluminum frame and weighing surface
Heavy duty Stainless Steel bottom plate
Ground Requirements These weigh pads must be used on a hard level and flat surface only and should be level within 1/8" per square meter
Dimensions Max: 41 5/16" x 18 1/2" x 0.9"; weighing surface: 39 3/8" x 16 1/2"
Sealing Standard IP-66: totally protected from dust; protected from strong jets of water
Power

Dynamic scale is powered by the LCIB, which is powered from the USB port of the computer (draws < 500mA)

System Components:

  • 2 one meter Ultraslim Wheel Load Scales

  • 1 Y-Cable to connect both weigh pads to LCIB computer Interface

  • 1 LCIB Computer Interface Device

  • 1 USB cable to connect LCIB to a computer

  • 1 Weigh In Motion (WIM) software package (windows 32 bits compatible, not vista supported)

 

Pricing:

Portable Weigh-In-Motion System

$16,715.00 CDN, $12,685.00 USD

4 Pieces of 22mm leveling track, 4.5 m long by 1 m wide for WP-US-1MH-40K-LB-6PC weigh pad with steel rod at one end terminated at widest point and ramp at other end.

$3,588.00 CDN, $2,723.00 USD

+ Shipping & applicable taxes, FOB Saskatchewan

Currency Converter

 

HOME

 

Davco Weight Scales Inc.
P.O. Box 4104
Quesnel, British Columbia, Canada
V2J 3J2

Toll Free 1-877-747-8371
Phone 1-250-747-8371, Fax 1-250-747-8372

All contents of this site ©1999-2017 Davco Weight Scales Inc.